Biogas blower What are the characteristics of natural gas blower during installation and use
Both biogas blowers and natural gas blowers are special gas type blowers. Generally speaking, if the blower is die-cast as a whole and uses anti-vibration mounting feet, then its requirements for the installation foundation are also very low and even fixed feet are not needed. Normal operation is very convenient, and it also saves installation costs and installation cycles. The mechanical wear is very small because there are no other mechanical contact parts except the bearings, so the service life is of course very long as long as it is under normal use conditions. .
The biogas blower should be protected from dust. In places where there is a large amount of dust powder or fibers, a filter should be installed, and the dust attached to the filter screen and inside the blower should be cleaned regularly. Ventilation and heat dissipation should be used in a well-ventilated place. Do not use it in a small closed room or room with a small space. Use a storage space in a closed box. To facilitate routine maintenance and repair, avoid installing in too small a place and avoid vibration. Install in a vibration-free place. If vibration in the place is unavoidable, shock-absorbing measures should be taken.
Shandong Jinan Zhangqiu blower manufacturer Mingtian Machinery Group said that if the blower is not used for a long time, it is necessary to cut off all power on the body and place it in a ventilated and dry place. This can effectively avoid the occurrence of damage to the body during long-term non-use. Rust, etc. It must be oiled regularly during use. Only in this way can the flexibility of the fan operation be ensured to the greatest extent. Check the fastening of each part of the blower and whether the positioning pin is loose. If there is any looseness, tighten it and fix it.
