Bróga Glev Turbo Slower

First Let’s see the working principle of turbo blower:

Turbo blower is a type of equipment which Air enters the three-dimensional flow impeller directly driven by maglev high-speed permanent magnet motor. Driven by the high-speed rotating impeller, kinetic energy and pressure potential energy are generated. Part of the kinetic energy is converted into pressure potential energy in the diffuser and volute channel, changing the flow direction, and finally enters the pipe network through the exhaust pipe.

The Next is Configuration Turbo Blower as below：

The most important for you is Core Technology：

－Core Technology from France

High-efficiency centrifugal impeller

Adopt ternary flow theory design to maximize

impeller efficiency and wide working area

Centrifugal impeller is made of high-strength forged aluminum, which has strong resistance to deformation

Accurately processed by a five-axis CNC machining center
The surface of the impeller is treated with anodized acid, which enhances the corrosion resistance of the impeller and reduces wear

during long-term high-speed operation

High power high speed permanent magnet synchronous motor

Use High speed and high power permanent magnet synchronous motor

Small motor, light weight and high power density

High motor speed, up to 42,000 rpm

Achieve stepless speed control

Motor rotor and impeller adopt direct connection structure, with low operating failure rate and high transmission efficiency

Five degrees of freedom magnetic bearing

Maglev bearing suspends the rotating shaft stably through controllable electromagnetic suction force, during the rotation process
The shaft has no mechanical contact and mechanical friction, so it is highly efficient.

No speed-increasing gear or oil bearing

No lubricant required
No oil from Discharge

Dedicated control system

High-power inverter speed control system with completely independent intellectual property rights

Inverter measured efficiency (output work/input work) up to 98%

Adjust the motor speed by changing the frequency of the inverter output current to adjust the flow

Wide working range, automatic adjustment of motor speed according to pipe network conditions,achieve accurate aeration

The motor control system, maglev control system and the whole machine control system are integrated.

After the core technology, let’s check the following specification and parameters:

Specification and Parameters

Model	SC22	SC30	SC37	SC45	SC55	SC75	SC110	SC150	SC200	SC250	SC300	SC350	SC400
△P(kpa)	Flow Rate(m3/min):1ATM,20℃
40	20	32	38	47	60	90	123	180	235
50	17	24	33	40	50	75	103	150	190	240	290	375	390
60	15	21	28	34	40	65	88	130	160	205	245	320	330
70	13	19	25	31	35	55	78	105	145	180	220	280	290
80	10	18	22	28	32	50	73	90	130	155	185	250	255
90					30	45	63	80	115	140	165	225	240
100							58	70	110	130	150	205	220
120									100	115	130	180	190

Then the next is Turbo Blower Performance and Advantages:

1. High Benefits and Profitability

Driven by Self-designed high-efficiency Centrifugal impeller+high-efficiency permanent magnet synchronous motor

30% more efficient than traditional volumetric Roots blowers

20% more efficient than traditional multi-stage centrifugal blowers

12% more efficient than traditional geared single-stage centrifugal blowers

2.No Lube,No Mechanical Maintenance

Due to the use of advanced magnetic levitation bearing technology, the complicated gearboxes and oily bearings necessary for traditional blowers are eliminated, so no lubricant and no mechanical maintenance are achieved.

Effectively reduce the maintenance cost of users, improve the stability of the operation of the aeration system and the entire sewage treatment plant.

3.Low vibration and low noise

Since use the advanced maglev bearing system, the rotating parts have no contact and no mechanical friction with the mechanical system, which has stable operation, low vibration, and low machine noise.

4.Easy Installation and Maintenance

The maglev centrifugal blower is light in weight and small in size, and does not require large lifting equipment. Installation can be easily done by two technicians.

Regular maintenance only needs to replace the air filter, which is convenient and simple .

If you are interested in its dimenstion, you should take care of the following contents:

Turbo Blower Installation Dimension and Requirement:

Installation Dimension:

Model	Dimension
	L	W	H
SC75	1650	1250	1600
SC100	1700	1400	1700
SC150	1850	1450	1900
SC200	2500	1600	1900
SC300	3000	1700	2200
SC400	3200	2000	2300

Turbo Blower Installation Requirement:

Minimum Requirement of the distance from the Roof and the Top=D1

Minimum Requirement of the distance from Back to Side=D2

Minimum Requirement of the distance from Left to Side=D3

Minimum Requirement of the distance from Front to Side=D4

Minimum Requirement of the distance from Right to Side=D5

Sufficient space must be left around the blower to meet the needs of disassembly, assembly and routine maintenance. The space requirements are as follows:

① The distance between the top of the blower skid and the roof should be at least 1.5 m;

② The foundation requirement of the unit is a reinforced concrete leveling foundation with sufficient strength to support the weight of the blower and ensure long-term stability.
Avoid mezzanine, overhead and hollow floors.

③ The clearance on the side (front) of the control cabinet of the sowing body should be at least 1m away;

④ The clearance on the side (back) of the prying frame blower should be at least 1m

⑤The clearance of the air inlet side (left side) of the prying frame should be at least 1m;

⑥ The clearance on the opposite side (right side) of the air inlet of the prying frame should be at least 1m away;

The distance between two adjacent blowers should be at least 1m;

http://Https://en.sdmtgf.cn

Https://www.cnrootsblower.com

https://www.sdmglw.com/

Model	SC22	SC30	SC37	SC45	SC55	SC75	SC110	SC150	SC200	SC250	SC300	SC350	SC400
△P(kpa)	Flow Rate(m3/min):1ATM,20℃
40	20	32	38	47	60	90	123	180	235
50	17	24	33	40	50	75	103	150	190	240	290	375	390
60	15	21	28	34	40	65	88	130	160	205	245	320	330
70	13	19	25	31	35	55	78	105	145	180	220	280	290
80	10	18	22	28	32	50	73	90	130	155	185	250	255
90					30	45	63	80	115	140	165	225	240
100							58	70	110	130	150	205	220
120									100	115	130	180	190

Turbo Blower Performance and Advantages:

1. High Benefits and Profitability

Driven by Self-designed high-efficiency Centrifugal impeller+high-efficiency permanent magnet synchronous motor

30% more efficient than traditional volumetric Roots blowers

20% more efficient than traditional multi-stage centrifugal blowers

12% more efficient than traditional geared single-stage centrifugal blowers

2.No Lube,No Mechanical Maintenance

Due to the use of advanced magnetic levitation bearing technology, the complicated gearboxes and oily bearings necessary for traditional blowers are eliminated, so no lubricant and no mechanical maintenance are achieved.

Effectively reduce the maintenance cost of users, improve the stability of the operation of the aeration system and the entire sewage treatment plant.

3.Low vibration and low noise

Since use the advanced maglev bearing system, the rotating parts have no contact and no mechanical friction with the mechanical system, which has stable operation, low vibration, and low machine noise.

4.Easy Installation and Maintenance

The maglev centrifugal blower is light in weight and small in size, and does not require large lifting equipment. Installation can be easily done by two technicians.

Regular maintenance only needs to replace the air filter, which is convenient and simple .